Setpoint Not Met Summary Report

Workspace = Reports

Related Topics: Reports Features, Reports Toolbar

The Setpoint Not Met Summary Report contains three graph + table combinations:

Total Setpoint Not Met Summary
Cooling Setpoint Not Met Summary
Heating Setpoint Not Met Summary

Quick Review Questions to Consider

Which months have the highest occupied columns on the Total Setpoint Not Met Summary?
What thermal zones are the largest contributors?
Do the months have both heating and cooling setpoint hours not met?
Check the Zone Conditions settings for the thermal zones that are the largest contributors to see if the settings are incorrect?

Total Setpoint Not Met Summary

The column graph at the top displays the hours that the setpoint was not met for the month for occupied and unoccupied hours. The columns in the graph align with the columns of hours being reported in the table. The table below contains a row for each thermal zone that was simulated. On the left side there is a column identifying the minimum indoor temperature for the thermal zone during the simulated period. The column on the far right displays the maximum indoor temperature for the thermal zone during the simulated period. The main body of the table contains two columns for each month. "Occ" = occupied hours setpoint not met. "Un" = unoccupied hours setpoint not met. The last row in the table provides the total hours for all the thermal zones for that month and is the same value that is graphically displayed in the column graph.

Cooling Setpoint Not Met Summary

Same composition as the Total Setpoint Not Met Summary graph + table combination. The only difference is that this one is focused on cooling versus Total.

Heating Setpoint Not Met Summary

Same composition as the Total Setpoint Not Met Summary graph + table combination. The only difference is that this one is focused on heating versus Total.

______________________________________________________________________________________