gbXML Import

Location: Multiple Workspaces - Import

The following outlines the process for importing a gbxml file, which can be done from multiple workspaces including Site, Building, Systems, Libraries and Templates tabs.

Tip: Importing an IDF, IFC and gbxml models involve similar steps, however importing a DWG/DXF file is handled differently. To import a DWG/DXF to use as an underlay to create geometry or for a reference use the DWG/DXF button on the 2d view within any of the workspaces where it is displayed.

Step 1: Select Import from the ribbon to access the Import Workspace

Step 2: Browse to locate the desired gbxml file. In this example we are importing a gbxml file that is located on our desktop

Step 3:Now the gbxml file name path appears in the field. Select Import Design Data to enable the initial preview of the gbxml model. A status bar will appear showing the progress of the import.

When the 'Import Design Data' process is complete a dialog box will appear conveying that the model has been successfully imported.

When the user selects OK, the imported gbxml model will appear in the 3d view.

The user can now "visually" review the model, and can also use the project component tree to select the building floors to review the import properties displayed in the table below.

Step 4: To complete the Import Process select Copy to E+ Project Model. A progress bar will appear displaying the status while the gbxml model is being copied to the Simergy model.

Step 5: The gbxml Import process is complete.

Note: The gbxml file has now been imported into Simergy, however it hasn’t been saved yet. Select File/Save.

What's Next

______________________________________________________________________________________